• Re: output of lsblk

    From nelgin@VERT/EOTLBBS to All on Tue May 13 21:22:35 2025
    On Tue, 13 May 2025 12:39:17 -0700
    "Bogomips" (VERT) <VERT!Bogomips@endofthelinebbs.com> wrote:


    Now I can log in here, switch to a different terminal. try the
    command and switch back. That's one of the things I love about slack.

    That's a linux thing, not a slack thing. Actaully, SCO Unix also had
    virtual terminals. I'm sure others did too.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    * Synchronet * End Of The Line BBS - endofthelinebbs.com
  • From Boraxman@VERT/MSRDBBS to Bogomips on Wed May 14 08:18:00 2025
    Bogomips wrote to All <=-

    @MSGID: <68236351.18496.dove-hlp@vert.synchro.net>
    NAME MAJ:MIN RM SIZE RO TYPE
    MOUNTPOINTS sda 8:0 0 167.7G 0
    disk |-sda1 8:1 0 500M 0 part
    |-sda2 8:2 0 128M 0 part
    |-sda3 8:3 0 151.4G 0 part
    |-sda4 8:4 0 1.2G 0 part
    |-sda5 8:5 0 13.5G 0 part
    `-sda6 8:6 0 1.1G 0 part
    sdb 8:16 0 1.8T 0 disk
    `-sdb1 8:17 0 1.8T 0 part
    sdc 8:32 1 57.7G 0 disk
    `-sdc1 8:33 1 57.7G 0 part

    That was what I have.

    Again, the sdb does not show up when I run cfdisk

    Im still trying to output the dmesg to a file so i can read it.

    I'll see if i can find anything in var/log/messages next time.

    I appreciate everyones efforts

    The 2TB drive IS there, its /dev/sdb. It has a 1.8TiB partition.

    When you start cfdisk, you need to specify the disk to use as a command line parameter. It defaults to /dev/sda, which is why you are only seeing that disk. Thats all it was!


    Start cfdisk like this

    /sbin/cfdisk /dev/sdb

    or
    sudo /sbin/cfdisk /dev/sdb

    However you start it, ALL you need to do is just add /dev/sdb as a parameter. and you'll be editing /dev/sdb.

    Alternatively, you can try GParted.

    I suspected that it was something like that.

    ... BoraxMan
    --- MultiMail/Linux v0.49
    þ Synchronet þ MS & RD BBs - bbs.mozysswamp.org